From concept to container — Midwel is the authorized export office of a 23-year aerosol manufacturer (est. 2003), offering turnkey OEM/ODM with 200+ mature formulas and end-to-end compliance support.
Six capabilities, one programme — from the lab sample to the loaded container.
200+ base formulas; the lab works to your target and sends a bench sample.
Can, valve, cap and actuator. Print goes onto the tinplate, not a label.
150–750 ml, 45–70 mm. Toll filling, short runs and quick-turnaround batches.
Incoming material and valves checked; leak, pressure and spray pattern per batch.
Sample, minor, full or design-based ODM — you approve at each gate.
Customs paperwork, MSDS, UN certification, sea and air freight.
Four starting points — formula and artwork, liquid only, a sample, or nothing. OEM/ODM from 20,000 pcs, stock from 5,000.
5,000 pcs
READY STOCK MOQ
3-5 days
STOCK LEAD TIME
20,000 pcs
OEM MOQ
15-20 days
OEM LEAD TIME
We make the can to your print spec and fill it, in one plant.
We make the can to your artwork and fill it off the same line.
We read format, valve and finish from your sample, then develop and fill.
Order an existing formula under your label, from 5,000 pcs.
Not sure which route fits your project? Tell us your target market and volume →
Free of charge (freight collect).
Quoted case by case — send the fill and the can spec and we come back with a figure. Credited against your first bulk order.
15-30 days when the lab has to develop the formula; artwork proofs come back in 3 days.
DHL, FedEx or UPS — billed to your account or ours.
Formulation, can making, filling and export documents run as one programme, under one agreement.
Toll filling from 150–750 ml on UN-certified lines, 45–70 mm diameter.
Retail or export cartons, palletisation and a loading plan drawn before shipping.
Tinplate or aluminium, printed 1–6 colours before forming. Can and fill, one plant.
Many aerosol contract manufacturing suppliers split can making from filling — our automotive aerosol contract manufacturer programmes keep can, valve and fill on one line and one QC record. Want the numbers first? The MOQ guide, OEM versus private label and the 6-week insecticide launch break it down, or browse the full product range.
2–3 days
7–15 days
7–10 days
5–7 days
15–20 days
3–7 days
Printed before the can is formed — the artwork is part of the can, not a label. Tinplate is lacquered inside and printed outside; aluminium is extruded with no side seam. See the line on our factory tour →
200+ mature formulas across 13 product categories
Start from proven formulas or develop a custom blend. Our R&D team handles everything from performance tuning to compliance.
Can shape, diameter, valve, cap and print — one plant, so there is no separate can supplier to coordinate.
Straight, necked-in and cone-top cans, plus 3-piece tinplate cans — matched to your valve, fill volume and shelf look
45mm, 52mm, 57mm, 65mm, 70mm
150ml – 750ml (custom sizes available)
Standard valve, 360° valve, foam valve, wide-spray valve
Standard cap, actuator cap, dust cap
Lithographic printing in 1-6 colors straight onto the tinplate, plus silk-screen and heat-transfer finishes
Tinplate (0.18-0.28mm) or aluminum, anti-corrosion lamination available — food-grade raw materials with full traceability
Buying the cans on their own — we supply the container empty and printed to your artwork, in tinplate or aluminium, from 5,000 pcs. Send can specs →
Capacity of the certified plant behind every order — Dingzhou, Hebei — pilot runs through high-volume global orders.
The certificates and paperwork your customs broker actually asks for — ready before the container leaves.
Each certificate is issued against the production lot of your order, not a generic product code. Which UN class applies? Our UN 1950 aerosol classification guide covers Class 2.1 versus 2.2 and the four tests every can must pass.
GHS-aligned safety data sheet, one per formulation — issued per SKU and refreshed whenever a formula changes.
Covers the exact can + valve combination you order, not a generic model certificate borrowed from another SKU.
Pressure and drop test report for each production run, issued within 7 days of batch completion. Never reused across batches.
Correct UN 1950 shipping name, class and packing instruction, declared under our verified exporter account.
Outer-carton markings and labels applied to your destination market's dangerous goods rules, checked before loading.
Stowage and segregation plan meeting IMDG Chapter 7, so your forwarder is not re-planning at the port.
Need REACH for the EU, SASO for Saudi Arabia, DOT for the US, or a declaration your retailer asked for? Tell us the destination market and we confirm what we can supply before you commit.
From concept to container — let's build your aerosol product together. Get a free consultation and sample quote today.